» GEYSER

Nominal electrical supply :

U = 230 Vac ± 10 %  ;  f = 50 / 60 Hz.

Maximum supplied power :

5 kW,

Heating elements :

two resistance elements of immersion heater type,
in sintered insulation and copper well,

Heating power of
the heating devices :

• 2 kW for the first one,
• 3 kW for the second,

Operating mode of
the heating devices :

• in economical running (separately 2 kW or 3 kW)
• in maximum running (simultaneously 5 kW)

the running of each element is signaled by Light Electronic Diode, incorporated within the respective push button switch,

Maximum temperature
of the heated water :

60ºC,
overheating : 40ºC for a flow rate of 1.5 liters/min.,

(at the maxim supplied power of 5 kW)

Minimum pressure of
the inlet water :

0.04  MPa, (0.4 bar),

Flow rate of
the heated water :

adjustable from the inlet water faucet, depending both on the temperature of the inlet water and on the desired temperature of the heated water, respectively on the selected heating power,

Protection against
electrocution :

class “I” (all electrically active parts are entirely insulated from the water circuit and from the manual controls of the appliance ; it is also foreseen with grounding cable),

Protection degree :

IP 54,

Protection against humidity :

IP X4 (against water drops),

Protection in operation :

against both the overheating and the hazardous drop of the inlet water pressure (thermo limiter and pressure switch with double contact),

Sanitary protection :

the heating circuit of the water is made of sanitarily approved components (it is non corrosive and free of  toxic components),

Overall dimensions :

285 x 180 x 110 mm